We can e-mail to you the specifications and descriptions
for the entire Iskroline product range.
Express analysis of metal and alloy components:
Excellent performance, easy to use, accuracy and reliability
24x7 cycle, easy operating environment, low cost to own and maintenance friendliness.
High thermal stability. Gas discharge arrester. Digitally controlled discharge, etc.
Various bases (Fe, Al, Cu, Sn, Sb, Ni, Co, Mg etc.) with 3σ detection limit of 0.0001% or better (subject to element type).
174-930 nm. continuous wavelength range (including P, S, C, N, H, O, alkaline and alkaline earth element lines with 0.007 nm. or better resolution.
Designed for express emission spectroscopy (below 27 s) of metals
Application: from machinery engineering and metallurgy companies to R&D facilities.
Precision analysis of alloying elements and impurities S, P, C, Si, Cu, Mg, Ti, Fe, W, Nb, Ni, Cr, Al, Mo, V etc. in conductiv samples with varying bases.
Analysis of heterogeneous, small, miniature and complex samples.
We will provide custom-tailored setup of your spectrometer based on your samples, tasks, goals and conditions. We provide hardware and know-how support to R&D lab facilities.
All our spectrometers are listed in the national Registers of measuring instruments in Russia, Belarus, Kazakhstan, etc.
Ferrous and non-ferrous alloy grade verification and identification (including complex custom alloys).
Our spectrometers can be operated in industrial environment subject to meeting the related operating conditions. Designed for 24x7 operation.
Successful track record in upgrading early spectrometer versions (DFS, MFS, ISP). Component upgrade or total spectrometer trade-in on special terms.
Some spectrometers do not need any professional installation. We provide operator training. On-site training and installation available.
Full one-year warranty on all components and parts with optional 12 or 24 month extension. Free remote support throughout product service life.
Iskroline top sellers.
Iskroline 100 benchtop emission spectrometer is a state-of-the-art metal and alloy analyzer.
It is primarily designed for accurate and fast analysis of conductive samples with various bases (Fe, Al, Cu, Zn, Pb, Sn, Ni, Ti, Co, Mg etc.) and quantification of alloying elements and impurities: C, Si, Cu, S, P, Mg, Ti, Fe, W, Nb, Ni, Cr, Al, Mo, V etc.
Flagship emission spectrometer
ISKROLINE 300, our laboratory grade stationary emission spectrometer, is designed for fast and accurate analysis of metals and alloys with various bases (Fe, Al, Cu, Zn, Pb, Sn, Ni, Ti, Co, Mg etc.) for quantification of the following alloying elements and impurities: S, P, C, Si, Cu, Mg, Fe, Ti, W, Nb, Ni, Cr, Al, Mo, V, etc.
Maximum concentration level of impurities detectable by Iskroline spectrometers is virtually unlimited due to synchronized elemental content quantification on several high and low intensity analytical lines of the related element (so-called “strong” and “weak” lines). It is the ‘weak” lines that help to increase the dynamic measuring range concentration-wise hundred- and thousand-fold.
You can see our products at various professional exhibitions or at our office.
Please feel free to bring your samples and we will test them immediately for you.
We have helped over 250 clients to solve challenging tasks.
Please feel free to contact us for advice or assistance.
Our commitment to continuous improvement
is witnessed by our clients.
We are extremely grateful to Iskroline for the opportunity to use their spectrometers in our R&D tests of compositional uniformity of Co-Fe alloy targets for PVD processing.
This instrument is precise, accurate and reliable. We use it for in-process chemical analysis of iron and steel and source mixture. Measuring performance always conforms to the national accuracy standards.
With this spectrometer we have been able to cut down our metal input inspection to 20-30 minutes and significantly reduce harmful exposure. Previously such inspection would require as much as 72 hours. ISKROLINE 100 is an extremely beneficial experience, and it can be recommended for industrial application.
Our company has been using this instrument since 2013. We use it for chemical analysis of ferrous metals (low carbon steel). Iskroline 100 has proved to be a very positive experience in operation. We also appreciate the professional support provided by the manufacturer.
It is a high performance and user friendly spectrometer. It has delivered excellent quality and repeatability. We enjoyed most its simple calibration procedure and extensive range of detectable metals and alloys.
Remote support throughout entire product life.
+7 (812) 924-12-58
We can ship our products internationally by any carrier. Product customs clearance and delivery to agreed customs terminal are also available.
Prompt warranty and post-warranty support at our facilities and on-site in Russia and CIS.